Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Juan C.

Pages: [1] 2 3 ... 7
1
Third Party Device Driver Software Development / Re: XBMC Driver
« on: February 18, 2013, 06:07:37 pm »
Unfortunatelly not yet, have being trying to avoid to reset the HD, don´t want to to into the hold mes of isntalling everything as it was

2
Third Party Device Driver Software Development / Re: XBMC Driver
« on: February 14, 2013, 08:06:07 am »
I´ll like to test it, let me just get up and running my server, has being down for two week due to comunication error, I might need to reset my PC

3
General Discussion / Re: Conection error
« on: February 04, 2013, 11:48:07 am »
No, it shows valid

4
General Discussion / Re: Conection error
« on: February 03, 2013, 10:35:42 am »
I upgrade to the new version, it was working fine for one week, don´t recall if I upgrade the PC or not, and yes this computer is where the master service is running, is a laptop with Win7

5
General Discussion / Re: Insteon Hub 2242-222 support
« on: February 03, 2013, 10:33:39 am »
IOSTREAM, I got both ISY and HUB, definetly the ISY is stronger, don´t have much detail on the HUB yet, but for the price should be a good option.

6
General Discussion / Conection error
« on: February 01, 2013, 05:09:13 pm »
Anybody had a similar problem in the past, can not get Elve up an running, if I reset computer will connect for a minute then disconnect again, Thanks


The Master Service on 'AUTOMATION' lost its connection to the Driver Service on 'AUTOMATION'. When testing the connection a SocketException was thrown (see below). The driver service will continue attempting to reconnect to the Master Service.

SocketException: Se ha forzado la interrupción de una conexión existente por el host remoto
SocketException SocketErrorCode: ConnectionReset

System.Net.Sockets.SocketException: Se ha forzado la interrupción de una conexión existente por el host remoto

Server stack trace:
   en System.Net.Sockets.Socket.Receive(Byte[] buffer, Int32 offset, Int32 size, SocketFlags socketFlags)
   en System.Runtime.Remoting.Channels.SocketStream.Read(Byte[] buffer, Int32 offset, Int32 size)
   en System.Runtime.Remoting.Channels.SocketHandler.ReadFromSocket(Byte[] buffer, Int32 offset, Int32 count)
   en System.Runtime.Remoting.Channels.SocketHandler.Read(Byte[] buffer, Int32 offset, Int32 count)
   en System.Runtime.Remoting.Channels.SocketHandler.ReadAndMatchFourBytes(Byte[] buffer)
   en System.Runtime.Remoting.Channels.Tcp.TcpSocketHandler.ReadAndMatchPreamble()
   en System.Runtime.Remoting.Channels.Tcp.TcpSocketHandler.ReadVersionAndOperation(UInt16& operation)
   en System.Runtime.Remoting.Channels.Tcp.TcpClientSocketHandler.ReadHeaders()
   en System.Runtime.Remoting.Channels.Tcp.TcpClientTransportSink.ProcessMessage(IMessage msg, ITransportHeaders requestHeaders, Stream requestStream, ITransportHeaders& responseHeaders, Stream& responseStream)
   en System.Runtime.Remoting.Channels.BinaryClientFormatterSink.SyncProcessMessage(IMessage msg)

Exception rethrown at
  • :

   en System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   en System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   en SharedLibrary.IDriverServiceRemotingClass.Ping()
   en MasterService.MasterServerEventEngine._monitorDriverServicesTimer_Elapsed(Object sender, ElapsedEventArgs e)

7
Elve Version 2.0 Beta (Closed) / Re: ISY Driver
« on: January 18, 2013, 10:46:30 am »
It worked for me on win 7

8
General Discussion / Re: New House Build - Need Help
« on: November 30, 2012, 02:48:49 pm »
Drunwith power,

Yes, I´m running it from that laptop, is a HP NX7300 2 core with 2G memory and a NAS docking station, it runs smooth, before that I had it running on a Acer Revo 1600 which is a single core Atom, didn´t have any issue with Elve, but a CCTV software was making very slow, that´s why I made the change.

Iostream,

I just purchase the ISY994i from Smarthome, but is not intended to be use at home, I´m about to open a shop were we are going to be offering intregation services, among the system that I´ll be using are Insteon and Control4 (which I´m already certify), also audio and video distribution, CCTV and others. I´m currently waiting on the new Insteon HUB, will like to test it to see how it works.

9
General Discussion / Re: New House Build - Need Help
« on: November 29, 2012, 02:49:07 pm »
Dont use the remotes at all, I´m using the GC100 to send the IR codes. For the TV´s I have two of them with wall plates (CAT6 keystone) and then connected teh supplied module to conver the signal to HDMI, on th eTV´s one of them is on top ot the TV and the other between TV and wall, the third TV is connected with an HDMI cable. Dont have any diagram but find attach some pictures.

10
General Discussion / Re: New House Build - Need Help
« on: November 29, 2012, 11:41:07 am »
For the IR definitly go with Global cache, have the GC100 working with no issues and very smooth, for video distribution I have a Monoprice 4x4 distributing HD over CAT6 to 3 tvs, have connect a Dish, Apple TV, Popcorn Hour Xbox360, have not complains. For thermostat I´m working with Aprilaire, have two of them with added sensor to monitor other areas including the outside, it work great. I´m also an Insteon guy and as other have mention it work great, the only issue that I have found is that I´m using the 2413UH and it seems that does not work with the new LED from Insteon, other than that I very happy.

11
User Showcase / Re: Panel shots
« on: August 22, 2012, 08:05:22 am »
Yes Iostream, it ans old HP NX7400 updated to Win7 and a NAS docking station

12
User Showcase / Re: Panel shots
« on: August 21, 2012, 06:20:17 pm »
I pretty much have two panels, one is for the server, light control and thermostat and the other one is for video distribution, not 100% done but as all of you know this is an on going project jajaja photo 11 is just a photo of the touch controlling everything

13
Device Configuration / Re: Samsung Smart TV driver
« on: August 03, 2012, 03:59:06 pm »
Thanks for the info.

14
Device Configuration / Re: Samsung Smart TV driver
« on: August 03, 2012, 08:26:16 am »
Frunple,

Nice video, how do you run Elve on the TV???, my TV is a Samsung model UE46EH5300W, I was trying to do something similar in the pass but I did not found how to do it. What I meant by the drivers is that I have control over my dish and Popcorn with my iPhone that are located on the first floor of the house, the problem is that I can not control the TV, so every time I wan to see TV I need to have the remote by my side, will like to have everything in one place, Thanks

15
Device Configuration / Samsung Smart TV driver
« on: August 02, 2012, 09:53:29 pm »
Anybody working on a driver for the samsung smart TV???

Pages: [1] 2 3 ... 7