Topics

1

Device Configuration / Anyone still here?? Need Zwave help

« on: October 29, 2017, 02:26:06 pm »

Not using my Omni Pro anymore and am trying to get the Elve Zwave driver going.
In the device properties, for battery level, lock state, and all thermostat entries I get this error:
Error: OverflowException: Arithmetic operation resulted in an overflow.

And this in the log:

Date:     10/29/2017
Time:     5:19:01 PM
Severity: Error
Source:   DriverService
Computer: PLEXSERVER
Context Type: Driver
Context Name: Z-Wave : Z-Wave
Description:
An error occured while polling node 0.

TimeoutException: Failed to receive the Vizia RF '<X...' response within 30000 milliseconds.

System.TimeoutException: Failed to receive the Vizia RF '<X...' response within 30000 milliseconds.
   at BuiltInDrivers.ViziaRF.ViziaRF_RZC0P_Communication.getResponse(Char responseCodeCharacter, Int32 timeoutMilliseconds)
   at BuiltInDrivers.ViziaRF.ViziaRF_RZC0P_Communication.GetRFTransmissionResponse()
   at BuiltInDrivers.ViziaRF.ViziaRF_RZC0P_Communication.SendCommand(String command, Boolean getRFTransmissionResponse)
   at BuiltInDrivers.ViziaRF.ViziaRF_RZC0P_Communication.SendZWaveCommand(Int32[] nodeIDs, CommandClass commandClass, Byte[] parameters, Boolean sendSecure, Boolean waitForRFTransmissionResponse)
   at BuiltInDrivers.ViziaRF.ViziaRF_RZC0P_Communication.SendZWaveCommand(Int32[] nodeIDs, CommandClass commandClass, Byte[] parameters, Boolean waitForRFTransmissionResponse)
   at BuiltInDrivers.ZWave.ZWaveManager.RequestNodeLevel(Int32[] nodeIDs)
   at BuiltInDrivers.ZWave.ZWaveManager.PollNode(ZWaveNode node)


Any ideas?

2

General Discussion / IOS App

« on: July 29, 2015, 06:05:31 am »

Is Elve Mobile available for the latest IOS version? Just upgraded a phone and I can't find it in the market anymore. I figure John must still use it so it should be there, right?

3

Third Party Device Driver Software Development / Existing C# Library

« on: January 07, 2015, 11:29:28 am »

Just a programming question... If there is an existing dll for a device that isn't currently supported, What's the process of writing a driver with the existing library?? Is it just a matter of "pointing" the Elve props and methods to the library?

4

Device Configuration / Generic Serial Driver

« on: December 30, 2014, 07:09:32 pm »

Anyone ever use it?? I'm trying to, but I can't seem to find where to put the received data...

I want to connect to an Arduino which sends the status of my blinds. So when Elve receives a specific message, the corresponding blind status will be updated. There doesn't seem to be any filters in the "Whenever" tab of the rule for "received data".

5

Rules Configuration / Get status of "all" devices?

« on: December 14, 2014, 11:26:08 am »

Now that the omni driver has lock status working, I'm trying to set up a rule to check the status of all locks at once.
So basically I want to do something like this:

Code: [Select]

if (omni.LockStatus[ALL]==0)
Is there a way to do this with one line or just list them all one at a time?

6

Touch Screen Interfaces / Boolean and multiple lights?

« on: November 17, 2014, 01:45:36 pm »

Trying to bind a boolean to a number of lights but it's not working as I want.
What I did was this:

Code: [Select]

omni.LightLevels[11] >= 1 || omni.LightLevels[12] >= 1
And any time the first light is on/off the boolean responds immediately. But when the second light (#12) is changed the boolean takes over a minute to respond.

Any ideas?

7

Third Party Device Driver Software Development / Arduino

« on: October 10, 2014, 06:22:27 am »

Anyone coming up with a driver for Arduino yet?

8

Third Party Device Driver Software Development / MiCasaVerde Vera Driver

« on: August 31, 2014, 06:35:22 am »

Any programmers interested in fixing the Vera driver?? There's an existing C# library for it, http://veradotnet.codeplex.com/ , and I have the original source from Elve.

9

General Discussion / License Expired

« on: August 16, 2014, 04:29:15 pm »

Went back to 1.5 because of the HAI driver problems and my license just expired.
Anyone know how to reset it without John?? Or how to get in touch with him to get him to reset it?
I sent a pm but no response yet.

10

Third Party Device Driver Software Development / MediaPlayerDriver Template

« on: July 27, 2014, 06:04:11 am »

The template seems to be missing 6 required interface members. I fixed 3 of them but I can't figure out the last 3.
Can anyone help with these?

Code: [Select]

c:\Windows\Temp\DynamicCompiledElveDrivers\zp3w0--s.0.cs(34,10) : error CS0535: 'BuiltInDrivers.SonosZP' does not implement interface member 'CodecoreTechnologies.Elve.DriverFramework.DriverInterfaces.IMediaPlayerDriver.SetZonePlaylistPosition(CodecoreTechnologies.Elve.DriverFramework.Scripting.ScriptNumber, CodecoreTechnologies.Elve.DriverFramework.Scripting.ScriptNumber)'
c:\Windows\Temp\DynamicCompiledElveDrivers\zp3w0--s.0.cs(34,10) : error CS0535: 'BuiltInDrivers.SonosZP' does not implement interface member 'CodecoreTechnologies.Elve.DriverFramework.DriverInterfaces.IMediaPlayerDriver.GetZonePlaylist(int, int, int)'
c:\Windows\Temp\DynamicCompiledElveDrivers\zp3w0--s.0.cs(34,10) : error CS0535: 'BuiltInDrivers.SonosZP' does not implement interface member 'CodecoreTechnologies.Elve.DriverFramework.DriverInterfaces.IMediaPlayerDriver.SupportsPlaylistIDFromCompanionMediaLibrary'


11

Device Configuration / Best way to store XM Channel Lineup?

« on: July 17, 2014, 12:39:58 pm »

So XM changed their channels again. Apparently they do a couple times a year for whatever reason, so instead of me having to change all of my XM screens again I'm thinking of storing the channels in one location, then the screens will pull from there.
What would be the best way? Global variables is the way I'm leaning but not sure if there may be a better way.

12

Device Configuration / Vera driver

« on: June 29, 2014, 05:08:23 am »

Has anyone used this driver?
Guessing the built in one is too old unless I'm missing something. Doesn't have settings for user/pass. Not sure how it can connect without it??

13

General Discussion / Services not working?

« on: June 11, 2014, 05:01:28 am »

Maybe I'm mistaken here but doesn't Elve run as a service? Meaning no one needs to be logged into the Elve machine?
At least that's what I thought but I woke up this morning, and the pc rebooted due to windows updates, and none of my morning events were triggered.
Shouldn't Elve run on a reboot or am I mistaken here?

14

Rules Configuration / Need to monitor my AC unit

« on: May 22, 2014, 04:50:12 am »

Had some problems last year so I want to keep an eye on it this year.
What I had in mind is a notification if the actual temperature in the house goes 3 degrees higher than the cooling set point.
So what I want is something like:

if ( omni.ThermostatCurrentTemperatures[1] > omni.ThermostatCoolSetPoints[1] "+ 3 degrees")

How would I add the + 3 degrees??

15

Rules Configuration / Wait til x

« on: May 26, 2013, 04:27:23 am »

How can I say "wait til 6am" in a script?
The only type of 'wait' I can find is the System.sleep but that won't (I believe) use an exact time.


I'll explain further, maybe there's an easier way.
I have a rule that opens my blinds at sunset. I want them to open at sunset, if sunset is after 6am.
So at sunset, when the rule executes, I want to check the current time, if before 6am, wait til 6am, then open blinds.
If sunset is after 6am, just open blinds.