Author Topic: UPB Lighting Driver  (Read 3024 times)

mustangcoupe

  • Full Member
  • ***
  • Posts: 108
    • View Profile
UPB Lighting Driver
« on: April 30, 2010, 05:45:10 pm »
I went into MS and turned one of my UPB dual channel light switches off using the driver device method, Set Light Level with fade and channel,  .... ID 14, Level 0, Fade rate 0, Channel 2.... No big deal.

I then went to Set Light Level with fade and setup to turn on light 12 to 100%
but in turn I got light 14 turned back on at 100%

I repeated this multiple times to my wifes dismay...


I also noted and this may or may not be a concern but the methods all show ( Method Name: SetLightLevel ) in the method description box Set Light Level, Set Light Level with fade, Set Light Level with fade and channel

if neeed I can turn on diag and try to get event logs

John Hughes

  • Administrator
  • Hero Member
  • *****
  • Posts: 2851
    • View Profile
    • Codecore Technologies
Re: UPB Lighting Driver
« Reply #1 on: May 01, 2010, 12:02:01 am »
That is odd. The method doesn't remember prior devices.  Yes the debug information would be very helpful.  Thanks
John Hughes
Codecore Technologies

John Hughes

  • Administrator
  • Hero Member
  • *****
  • Posts: 2851
    • View Profile
    • Codecore Technologies
Re: UPB Lighting Driver
« Reply #2 on: May 19, 2010, 10:40:03 pm »
Let me know if you have a chance to output some logs.

Thanks
John Hughes
Codecore Technologies

John Hughes

  • Administrator
  • Hero Member
  • *****
  • Posts: 2851
    • View Profile
    • Codecore Technologies
Re: UPB Lighting Driver
« Reply #3 on: June 12, 2010, 01:46:06 pm »
Quote
I also noted and this may or may not be a concern but the methods all show ( Method Name: SetLightLevel ) in the method description box Set Light Level, Set Light Level with fade, Set Light Level with fade and channel

This is normal and correct.

Quote
if need I can turn on diag and try to get event logs

Yes please do as I have not uncovered what could be causing this.
John Hughes
Codecore Technologies

mustangcoupe

  • Full Member
  • ***
  • Posts: 108
    • View Profile
Re: UPB Lighting Driver
« Reply #4 on: June 12, 2010, 03:38:09 pm »

i will try to get back to this soon.

John Hughes

  • Administrator
  • Hero Member
  • *****
  • Posts: 2851
    • View Profile
    • Codecore Technologies
Re: UPB Lighting Driver
« Reply #5 on: July 27, 2010, 09:58:43 pm »
How soon is soon?  ::)
John Hughes
Codecore Technologies

mustangcoupe

  • Full Member
  • ***
  • Posts: 108
    • View Profile
Re: UPB Lighting Driver
« Reply #6 on: November 07, 2010, 06:16:04 pm »
I guess soon wasnt soon enough... sorry.  I have been unable to reproduce this recently.. I know I did it back then, but I dont know what I was doing... Please close this item and we can reopen it if it reoccures

John Hughes

  • Administrator
  • Hero Member
  • *****
  • Posts: 2851
    • View Profile
    • Codecore Technologies
UPB Lighting Driver
« Reply #7 on: November 07, 2010, 06:45:51 pm »
Will do. Thanks for the follow up.
John Hughes
Codecore Technologies