JVC DLA RSx and Meridian MF10

Modified on 2010/12/15 11:07 by Administrator — Categorized as: Driver

Image
This driver supports the JVC DLA-RS1, DLA-RS2, DLA-RS10, DLA-RS20 and Meridian MF10 Projectors.

Manufacturer: JVC

Primary Communications Port: Serial


Configuration Settings


Events

Power State Changed

Occurs when the projector's current power state (on/off) changes.

Whenever Filter:

none

EventArgs:


Power Phase Changed

Occurs when the projector's current power phase changes.

Whenever Filter:

none

EventArgs:


Source Changed

Occurs when the projector's current source selection changes.

Whenever Filter:

none

EventArgs:


Ready State Changed

The device's running and ready state changed.

Whenever Filter:

none

EventArgs:


Instance Properties

Power

Gets or sets the power state (on/off) of the projector.

Accessibility : Read / Write

Type: Boolean

PowerPhase

Gets the current power phase. 0=Standby mode, 1=Power-on mode, 2=During Cool Down mode, 3=Warming mode.

Accessibility : Read Only

Type: Number

Source

Gets or sets the source selection. 0=S-VIDEO, 1=VIDEO, 2=COMP., 3=HDMI 1, 4=HDMI 2

Accessibility : Read / Write

Type: Number

DeviceDisplayName

The display name for this device.

Accessibility : Read Only

Type: String

DeviceStartTime

The date and time when this device was started.

Accessibility : Read Only

Type: DateTime

DeviceLifecycleStage

The current lifecycle stage of the device. The stages in order are: Pending Start, Starting, Running, Stopping

Accessibility : Read Only

Type: Number

DeviceIsRunningAndReady

Indicates if the device is ready for use, ie it is in the Running lifecycle stage and all properties are valid and all methods are ready to be used.

Accessibility : Read Only

Type: Boolean

Instance Methods

SetVStretch ( Boolean )

Meridian MF10 Only. Allows 2.35:1 images to use the entire D-ILA display area in conjuntion with a third-party amorphic lens.

Syntax

void SetVStretch( Boolean state )

Parameters

state : true for On and false for Off

SendRemoteControl ( String )

Send the same code as the supplied remote control. See user guide for available codes.

Syntax

void SendRemoteControl( String code )

Parameters

code : Remote control code.

SendRawCommand ( String )

Sends a command that may otherwise not be supported by the driver. The command should be formatted as a hexidecimal string, eg. 218901505731

Syntax

void SendRawCommand( String command )

Parameters

command : The command data to send (do not include the 0A terminator).

SetPropertyForDuration ( String, TimeSpan, Object, Object )

Sets a property for a duration of time and then sets the property to a subequent value asynchronously. This action returns after setting the first value and the timer and subsequent property set run in the background. Subsequent sets of the same property will reset the timer if the subsequent value has not yet been set. This is an advanced feature, be sure to set the property name correctly.

Syntax

void SetPropertyForDuration( String propertyName, unknown duration, Object initialValue, Object finalValue )

Parameters

propertyName : The name of the property to set.
duration : The amount of time to wait after setting the initial value to set the subsequent value.
initialValue : The value to set the property to initially.
finalValue : The value to set the property to after the duration of time has passed.

SetPropertyForDuration ( String, Number, TimeSpan, Object, Object )

Sets a property for a duration of time and then sets the property to a subequent value asynchronously. This action returns after setting the first value and the timer and subsequent property set run in the background. Subsequent sets of the same property will reset the timer if the subsequent value has not yet been set. This is an advanced feature, be sure to set the property name correctly.

Syntax

void SetPropertyForDuration( String propertyName, Number arrayIndex, unknown duration, Object initialValue, Object finalValue )

Parameters

propertyName : The name of the property to set.
arrayIndex : The property's array index to set.
duration : The amount of time to wait after setting the initial value to set the subsequent value.
initialValue : The value to set the property to initially.
finalValue : The value to set the property to after the duration of time has passed.